In short
- What it is: the 2G Engineering enlarged intake kit (three-hole flange with Venturi profile + closing cap) for Ducati SuperSport 939 and 939 S (2017–2020), all versions. Air filter not included: use the filter you already have.
- What it fixes: jerkiness below 4,000 rpm and the mid-range torque dip (4,300–5,100 rpm).
- Dyno-tested result: about +5–8 Nm from low revs up to 5,500 rpm and up to +5 HP in the mid-range, with the stock ECU and no remap.
- Plug & Play and reversible: fits the stock airbox with no cutting or drilling.
⚠️ FOR RACE USE ONLY
This product is intended exclusively for competition use on closed circuits. It is not approved for road use: use on public roads is not permitted.
Low-rev jerkiness and mid-range dip on the SuperSport 939: where they come from
In traffic, pulling away and out of hairpins, the stock 937 cc Testastretta 11° of the SuperSport 939 tends to jerk below 4,000 rpm and has an abrupt throttle pick-up (on-off effect), not ideal for a sportbike that is also built for touring. On the dyno, the stock curve shows a torque dip between 4,300 and 5,100 rpm, exactly where you cruise on country roads and on the motorway.
One of the main causes is the intake: on the stock airbox, air enters through a narrow, very restrictive inlet, designed mainly to meet homologation noise limits.
Why changing just the air filter is not enough
Many Ducati riders start by fitting a sport air filter for the SuperSport 939. The problem is that the air still has to pass through the stock inlet: if the inlet is narrow, a more permeable filter makes little difference. It's like having a marathon runner's lungs and breathing through a straw.
The solution: 2G Engineering enlarged intake kit
The kit replaces the stock airbox inlet with an enlarged three-hole intake flange, blended with a Venturi profile that guides the air into the engine without turbulence. The cylindrical filter mounts on the flange, closed at the bottom by a cap and secured with a long bolt. It works with the filter you already have: the stock filter or any filter with the same dimensions as the original. Every kit is designed and made in Soliera (Modena), in the heart of the Motor Valley, from carbon-fiber-reinforced PPA, and comes with all the hardware you need.
What changes on the road
- Strong low end and mid-range: the torque dip between 4,300 and 5,100 rpm disappears and throttle response becomes progressive and predictable, with no on-off.
- More torque and power without a remap: about +5–8 Nm from low revs up to 5,500 rpm and up to +5 HP in the mid-range, measured on the dyno with the stock ECU. Peak power rises only slightly (about +1 HP). No remap needed.
- Intake sound: deeper and fuller, typical of the Testastretta.
- Keep the filter you already have: works with the stock filter and with all sport filters with the same dimensions as the original.
On the dyno, a stock SuperSport 939 was compared with the same bike fitted with the 2G kit, with no remap: torque is higher from low revs up to 5,500 rpm and the dip in the middle of the curve is filled in, while peak power changes only slightly.
Which version to choose
| Version | What's included | Who it's for |
|---|---|---|
| Kit with 2G performance air filter | Enlarged intake kit + 2G dry polyester filter | Riders still running the stock paper filter |
| Intake kit without filter (this page) | Enlarged intake kit (filter not included) | Riders who already have an OEM-size air filter |
| 2G sport air filter only | 2G dry polyester filter, washable | Riders who want a lifetime filter for the stock airbox |
Compatibility
Ducati SuperSport 939 and 939 S (2017–2020), all versions. It fits the stock airbox with no modifications.
Compatible filters: all filters with the same dimensions as the original filter, both the stock one and sport filters.
Riding a SuperSport 950? It has the same engine and airbox: check out the intake kit for the SuperSport 950.
Installation
Installation is Plug & Play: the kit fits the stock airbox, nothing needs cutting or drilling, and you can return to the original setup at any time.
Approximate fitting time: about one hour.
Technical specifications
| Compatible models | Ducati SuperSport 939 and SuperSport 939 S, all versions |
|---|---|
| Years | 2017–2020 |
| Material | Carbon-fiber-reinforced PPA, professional 3D printing, matte finish |
| Air filter | Not included. Compatible with all filters with the original filter's dimensions, including the stock one |
| Dyno result | About +5–8 Nm from low revs up to 5,500 rpm and up to +5 HP in the mid-range, with stock ECU |
| Remap | Not required |
| Installation | Plug & Play on the stock airbox, reversible, no cutting or drilling |
| Package contents | Enlarged intake flange with Venturi profile, closing cap, long mounting bolt, all the hardware you need. Air filter not included |
| Installation time | About 1 hour |
| Made in | Italy, Soliera (Modena) |
Frequently asked questions
Is the air filter included?
No. This version contains only the enlarged intake kit: you use it with the filter you already have. If you also need a filter, choose the kit with the 2G performance air filter.
Which filters can I use?
All filters with the same dimensions as the original: the stock one and OEM-size sport filters.
Do I need to remap the ECU?
No. The kit is designed to work with the stock ECU of the SuperSport 939: the stated results (about +5–8 Nm from low revs up to 5,500 rpm and up to +5 HP in the mid-range) were measured with no remap.
Is it better to change the exhaust or the intake?
They do different jobs: the intake works on how much air gets into the engine, the exhaust on how the gases get out. Our kit is designed to deliver results with the stock exhaust and costs a fraction of a full exhaust system.
Does it fit every version of the SuperSport 939?
Yes: SuperSport 939 and 939 S, from 2017 to 2020.
Does it also fit the SuperSport 950?
Yes, the SuperSport 950 has the same engine and airbox as the 939. For convenience there is also a dedicated page for the SuperSport 950 kit.
Can I put the bike back to stock?
Yes. Installation requires no cutting or drilling: just refit the stock parts.
How long does it take to fit?
About one hour, with no modifications to the bike.
How long does shipping take?
All kits are in stock and ship within 24 hours, worldwide. You have 15 days from delivery to return the product if you're not happy with it.
Free up your SuperSport 939's intake: add the kit to your cart and we'll ship it within 24 hours.
Reviews
There are no reviews yet