In short
- What it is: the 2G Engineering enlarged airbox lid with a Sprint Filter P08 air filter (part number PM279S), for Ducati Panigale V2 and V2 S 890, built from 2025 onwards.
- What it fixes: rough low-rpm throttle response and missing mid-range torque.
- Dyno-tested result: about +4 hp and +6–7 Nm between 4,000 and 6,000 rpm, with the stock ECU and no remap.
- Plug & Play and reversible: fits the stock airbox with no cutting or drilling.
⚠️ FOR RACE USE ONLY
This product is intended exclusively for competition use on closed circuits. It is not approved for road use: use on public roads is not permitted.
Throttle response and mid-range torque on the Panigale V2 890: where the limit comes from
The new Panigale V2's 890 cc V2 twin needs to breathe, but the stock airbox has a very small air inlet. The result is a less smooth throttle response at low rpm and lower torque right where you use it most on corner exit: on the dyno the difference shows between 4,000 and 6,000 rpm.
More air, protected filter
Letting more air in shouldn't mean exposing the filter to water, dust and debris. Our lid enlarges the air inlet with a geometry designed to keep the filter shielded, with the reliability of the stock system.
The solution: 2G Engineering intake kit with Sprint Filter
The lid replaces the stock one and enlarges the air inlet, keeping the original mounts for the panels and control units. The box also includes the Sprint Filter P08 polyester air filter (part number PM279S): a complete intake system designed to work with the stock ECU. Every lid is designed and made in Soliera (Modena), in the heart of Italy's Motor Valley, from carbon-fiber-reinforced PPA.
What changes on the road
- Smoother throttle response: throttle response becomes more progressive at low rpm, out of slow corners and around town.
- More torque without a remap: about +4 hp and +6–7 Nm between 4,000 and 6,000 rpm measured on the dyno with the stock ECU. Peak power changes only slightly.
- Intake sound: deeper and fuller, especially from the midrange up.
- Minimal maintenance: the Sprint Filter P08 needs no oil: just clean it with compressed air.
The chart compares a stock Panigale V2 890 with the same bike fitted with the 2G intake system, without a remap: torque is higher from low rpm up to about 6,000 rpm, while peak power changes only slightly.
Which version to choose
| Version | What's included | Who it's for |
|---|---|---|
| Enlarged airbox lid only | Enlarged airbox lid (filter not included) | Riders who already have a filter: stock paper or OEM-size performance filter |
| Kit with Sprint Filter air filter (this page) | Enlarged airbox lid + Sprint Filter P08 | Riders who want the complete kit, lid and filter |
| Sprint Filter P08 only | Sprint Filter P08 (part number PM279S) | Riders who want to replace the stock paper filter |
Compatibility
Ducati Panigale V2 and V2 S 890, built from 2025 onwards. It fits the stock airbox with no modifications.
Riding a Hypermotard V2? Check out the enlarged airbox lid for the Hypermotard V2.
Installation
Installation is Plug & Play: the kit fits the stock airbox, nothing needs cutting or drilling, and you can return to the original setup at any time.
Approximate fitting time: about one hour.
Technical specifications
| Compatible models | Ducati Panigale V2, Panigale V2 S (890 cc) |
|---|---|
| Years | From 2025 onwards |
| Material | Carbon-fiber-reinforced PPA, professional 3D printing, matte finish |
| Filter included | Sprint Filter P08 polyester, part number PM279S, oil-free |
| Dyno result | About +4 hp and +6–7 Nm between 4,000 and 6,000 rpm, stock ECU |
| Remap | Not required |
| Installation | Plug & Play on the stock airbox, reversible, no cutting or drilling |
| Installation time | About 1 hour |
| Package contents | Enlarged airbox lid with original mounts for panels and control units, Sprint Filter P08 (PM279S), fixing screws, instructions |
| Filter maintenance | Clean with compressed air, no oil |
| Made in | Italy, Soliera (Modena) |
Frequently asked questions
Do I need to remap the ECU?
No. The kit is designed to work with the stock Panigale V2 ECU: the quoted gains (about +4 hp and +6–7 Nm) were measured without a remap.
Is the filter still protected from water and dirt?
Yes. The lid enlarges the air inlet with a geometry designed to keep the filter shielded from water, dust and debris, just like the stock system.
Does it fit the Panigale V2 S?
Yes: it fits the Panigale V2 and V2 S 890 built from 2025 onwards.
Does it also fit the Streetfighter V2 or Multistrada V2?
No. They share the engine but have a slightly different airbox: this lid is specific to the Panigale V2.
Can I put the bike back to stock?
Yes. Installation requires no cutting or drilling: just refit the stock lid.
How long does it take to fit?
About one hour, with no modifications to the bike.
How do I clean the filter?
The Sprint Filter P08 is made of polyester and needs no oil: clean it with compressed air blown against the direction of intake flow.
How long does shipping take?
All kits are in stock and ship within 24 hours, worldwide. You have 15 days from delivery to return the product if you're not happy with it.
Free up your Panigale V2's intake: add the kit to your cart and we'll ship it within 24 hours.
Reviews
There are no reviews yet