In short
- What it is: the 2G Engineering enlarged intake kit (spoked duct + closing base plate) with a dry polyester performance air filter, for Ducati Monster 696 (2008–2014) and Monster 796 (2010–2014), all versions.
- What it fixes: jerking and snatchy throttle at low rpm.
- Dyno-tested result: about +3 hp and +5–6 Nm between 3,500 and 5,500 rpm, with the stock ECU and no remap.
- Plug & Play and reversible: it fits the stock airbox with no cutting or drilling.
Low-rpm jerking on the Monster 696 and 796: where it comes from
In traffic, on a constant throttle or out of slow corners, the stock Monster 696 and 796's Desmodue twin tends to jerk at low rpm and have a snatchy, on/off throttle response.
One of the main causes is the intake: on the stock airbox, air passes through a long, narrow and very restricted duct, designed mainly to meet noise homologation limits.
Why a performance air filter alone isn't enough
Many Ducati owners start by fitting a performance air filter for the Monster 696 and 796. The problem is that air still has to pass through the stock duct: if the inlet is narrow, a freer-flowing filter changes very little. It's like having a marathon runner's lungs and breathing through a straw.
The solution: 2G Engineering enlarged intake kit
The kit replaces the long, restrictive stock duct with a shorter, more open enlarged spoked intake duct , finished with a closing base plate. The box also includes the 2G Engineering high-flow dry polyester air filter: a complete intake system designed to work with the stock ECU. Every kit is designed and made in Soliera (Modena), in the heart of Italy's Motor Valley, from carbon-fiber-reinforced PPA.
What changes on the road
- Smooth low-rpm response: throttle response becomes progressive and predictable, with no jerks.
- More torque and power without a remap: about +3 hp and +5–6 Nm between 3,500 and 5,500 rpm measured on the dyno with the stock ECU. Peak power changes only slightly. No remap needed.
- Intake sound: deeper and fuller, the classic Desmodue sound.
- Minimal maintenance: the filter is dry and needs no oil: just clean it with compressed air.
The chart compares a stock Monster 796 with the same bike fitted with the 2G kit, without a remap: torque is higher between 3,500 and 5,500 rpm, while peak power changes only slightly.
Which version to choose
| Version | What's included | Who it's for |
|---|---|---|
| Kit with 2G performance air filter (this page) | Enlarged intake kit + 2G dry polyester filter | Riders still running the stock paper filter |
| Intake kit without filter | Enlarged intake kit (filter not included) | Riders who already have an OEM-size cylindrical filter |
| 2G performance air filter only | 2G dry polyester filter, washable | Riders who want a lifetime filter for the stock airbox |
Compatibility
Ducati Monster 696 (2008–2014) and Monster 796 (2010–2014), all versions. Fits the stock airbox with no modifications.
Riding a Monster 1100? Check out the intake kit for the Monster 1100.
Installation
Installation is Plug & Play: the kit fits the stock airbox, nothing needs cutting or drilling, and you can return to the original setup at any time.
Approximate fitting time: about one hour.
Technical specifications
| Compatible models | Ducati Monster 696 and Monster 796, all versions |
|---|---|
| Years | Monster 696: 2008–2014; Monster 796: 2010–2014 |
| Material | Carbon-fiber-reinforced PPA, professional 3D printing, matte finish |
| Filter included | 2G Engineering dry polyester performance air filter, oil-free |
| Dyno result | About +3 hp and +5–6 Nm between 3,500 and 5,500 rpm, stock ECU |
| Remap | Not required |
| Installation | Plug & Play on the stock airbox, reversible, no cutting or drilling |
| Fitting time | About 1 hour |
| Box contents | Enlarged spoked intake duct, closing base plate, dry performance air filter, fixing bolts |
| Filter maintenance | Clean with compressed air, no oil |
| Made in | Italy, Soliera (Modena) |
Frequently asked questions
Do I need to remap the ECU?
No. The kit is designed to work with the stock Monster 696 and 796 ECU: the quoted gains (about +3 hp and +5–6 Nm between 3,500 and 5,500 rpm) were measured without a remap.
Will a performance air filter alone fix the jerking?
Usually not. The bottleneck is the long, narrow stock intake duct: a freer-flowing filter behind the same duct changes very little. The kit replaces the duct and already includes a performance filter.
Exhaust or intake: which should I upgrade first?
They do different jobs: the intake controls how much air gets into the engine, the exhaust how the gases get out. Our kit is designed to deliver results with the stock exhaust and costs a fraction of a full exhaust system.
Does it fit all versions of the Monster 696 and 796?
Yes: Monster 696 from 2008 to 2014 and Monster 796 from 2010 to 2014, all versions.
Can I return the bike to stock?
Yes. No cutting or drilling is needed: just refit the stock duct.
How long does it take to fit?
About one hour, with no modifications to the bike.
How do I clean the filter?
The filter is dry polyester and needs no oil: clean it with compressed air blown against the direction of intake flow.
How long does shipping take?
All kits are in stock and ship within 24 hours, worldwide. You have 15 days from delivery to return the product if you're not satisfied.
Free up your Monster 696 and 796's intake: add the kit to your cart and we'll ship it within 24 hours.
Reviews
There are no reviews yet